No products in the cart.
Ashirvad PVC Pipe Clips Big Holes-Solfit
In Stock
₹29.00
Pipe clips are used as a fixation accessory to fix pipes and fittings to the wall.
Description
- This SWR fitting is used to hold vertical drainage pipes in place in the plumbing network.
- Impact and UV resistant
- Individual residential dwellings.
| Nominal Size (inch) | Nominal Size (cm) | ID | WT | H | L |
| 2½ | 7.5 | 75.3 | 3.2 | 115 | 121 |
| 3 | 9.0 | 90.3 | 3.2 | 126 | 137 |
| 4 | 11.0 | 110.4 | 3.2 | 151 | 150 |
| 6 | 16.0 | 160.5 | 4.0 | 201 | 209 |
Additional information
| Size | 2 1/2 inch, 3 inch, 4 inch, 6 inch |
|---|
Related products
- Length- 3 meters
- High Dimensional accuracy to ensure a defect-free system.
- High Heat Resistance (Short term application – 93⁰ C & for Continuous use – 82⁰ C)
- Low toxicity
- Very High Limiting Oxygen Index (LOI) of 60%, does not catch fire or sustain burning
34%
This elbow fitting features a brass interior threaded section to direct the flow of water at a 90 degree angle between adjoining pipes
The Ball Valve is a sophisticated fitting that contains plastic components. This CPVC fixture features a pivoting ball that controls pressure and flow through the water pipes.
19%
The Brass tee MABT is an advanced CPVC fitting that is used to direct and divert water flow in the plumbing system. This fitting features a plastic tee with a brass threaded male end on one water inlet channel that can be secured on a threaded female end of an adjoining fitting. The brass tee MABT can be fitted along various diameters across different pressure outlets in the plumbing system. A tee is specifically useful in changing the direction of water flow with minimum to negligible structural changes in the overall piping system.
35%
This CPVC fitting regulates the flow of hot and cold water across vertical intersections across the plumbing system. The cross tee can be used across a variety of pipes of different diameters and pressure bearing capacities.
The 3-way elbow is a unique CPVC plastic contraption used to divert the flow of water in three different directions, all at a perpendicular 90-degree angle to each other. Typically elbow fittings are used to connect pipes of the same diameter that can be connected through threaded ends or through adhesive socket welding in sanitary pipe fittings. The three-way elbow can be used to connect pipes of varying circumferences and pressure bearing capacities
Reviews
There are no reviews yet.