No products in the cart.
19%
Ashirvad CPVC Brass Elbow – MABT
In Stock
In Stock
The Brass Elbow – MABT is a variation of the typical elbow joint with a protruding brass threaded exterior. This part is screwed into a female ended part of fitting or equipment to divert the flow of water in a certain direction at a 90-degree angle in the plumbing system.
Description
The Brass Elbow – MABT is a variation of the typical elbow joint with a protruding brass threaded exterior. This part is screwed into a female ended part of fitting or equipment to divert the flow of water in a certain direction at a 90-degree angle in the plumbing system.
| Nominal Size (inch) | Nominal Size (cm) | ID | OD | WT | SL | L | H |
| ¾ x ½" | 2.0 x 1.5 | 22.45 | 27.63 | 2.59 | 17.78 | 60.3 | 34.3 |
Additional information
| Size | 3/4 x 1/2 inch |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
This CPVC fitting is an extended variation of the elbow which is used to divert the flow of hot and cold water at a 90-degree angle in the plumbing system. The longer brass extension of this fitting is useful for the installation of bathroom fittings through thicker-than-average wall blocks of concrete. The threaded brass end can be used to connect to health faucets and taps while the socket-end connects to the adjoining pipe.
35%
Ashirvad CPVC Cross Tee
₹30.00 Select options
This product has multiple variants. The options may be chosen on the product page
This CPVC fitting regulates the flow of hot and cold water across vertical intersections across the plumbing system. The cross tee can be used across a variety of pipes of different diameters and pressure bearing capacities.
34%
Ashirvad CPVC Tee Holder
₹18.00 Select options
This product has multiple variants. The options may be chosen on the product page
This handy CPVC fittings is used to hold exposed long vertical pipes that run across multiple floors in a variety of residential, commercial and multi-purpose buildings. The tee holder needs to be screwed in securely on a wall panel to hold the exposed tee in place.
The Brass tee MABT is an advanced CPVC fitting that is used to direct and divert water flow in the plumbing system. This fitting features a plastic tee with a brass threaded male end on one water inlet channel that can be secured on a threaded female end of an adjoining fitting. The brass tee MABT can be fitted along various diameters across different pressure outlets in the plumbing system. A tee is specifically useful in changing the direction of water flow with minimum to negligible structural changes in the overall piping system.
Reviews
There are no reviews yet.