No products in the cart.
31%
Ashirvad PVC Equal Reducer Tee-Solfit
In Stock
₹23.00
The Equal Reducer tee is a fitting that has a vertical pipe running from end to end complimented with a pipe socket of a different diameter at an inclined degree angle. The reducer tee is handy for connecting pipes across two directions and circumferences to optimize water-flow across different pipes.
Description
- All equal fittings are socket less. Plain pipes/fittings can be connected directly.
- Ideal for use in sunken toilets and horizontal lines.
| Nominal Size (inch) | Nominal Size (mm) | ID | SL | WT | H | L |
| 2½ x 1¼ | 75 x 40 | 75.3 | 40 | 3.0 | 166 | 112 |
| 2½ x 1½ | 75 x 50 | 75.3 | 40 | 3.0 | 166 | 115 |
| 2½ x 2 | 75 x 63 | 75.3 | 40 | 3.0 | 166 | 118 |
| 4 x 1¼ | 110 x 40 | 110.41 | 48 | 3.8 | 227 | 165 |
| 4 x 1½ | 110 x 50 | 110.4 | 48 | 3.8 | 227 | 168 |
| 4 x 2 | 110 x 63 | 110.4 | 48 | 3.8 | 227 | 174 |
| 4 x 2½ | 110 x 75 | 110.4 | 48 | 3.8 | 227 | 178 |
| 4 x 3 | 110 x 90 | 110.4 | 48 | 3.8 | 227 | 184 |
Additional information
| Size | 2 1/2 inch x 1 1/4 inch, 2 1/2 inch x 1 1/2 inch, 2 1/2 inch x 2 inch, 4 inch x 1 1/4 inch, 4 inch x 1 1/2 inch, 4 inch x 2 inch, 4 inch x 2 1/2 inch, 4 inch x 3 inch |
|---|
Related products
This elbow fitting features a brass interior threaded section to direct the flow of water at a 90 degree angle between adjoining pipes
19%
The Brass tee MABT is an advanced CPVC fitting that is used to direct and divert water flow in the plumbing system. This fitting features a plastic tee with a brass threaded male end on one water inlet channel that can be secured on a threaded female end of an adjoining fitting. The brass tee MABT can be fitted along various diameters across different pressure outlets in the plumbing system. A tee is specifically useful in changing the direction of water flow with minimum to negligible structural changes in the overall piping system.
The step-over bend is one of few pipe fittings that provides an innovative solution for making arrears in existing vertical pipes. The unique fitting can be attached to in-built sockets of existing pipes without dislocating the water-flow in a running pipe.
The 3 in 1 mixer is used for the installation for a combination structure of hot & cold taps and showers in residential building projects. This mixer accommodates vertical pipes running through the plumbing systems from the top of the fitting range.
Reviews
There are no reviews yet.