Ashirvad PVC P Trap-Solfit

SKU: N/A Categories: ,
In Stock
From 199.00

This is a common SWR fitting used in combination with Pushfit & Solfit Pipes. It prevents transmission of unfavourable odours from the washroom to the living area. Ashirvad offers many variations of P-traps to suit the unique needs of your toilet.

Clear
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
Switches/Plumbing Material/Lights/MCBs
Switches/Plumbing Material/Lights/MCBs Shipping

Description

  • This is a self-cleaning trap. Prevents choke-ups as well as blockages in the drainage system.
  • Maintains the minimum required water seal. A water seal prevents the spread of sewer gases in the living area and aids in the optimal movement of water.
  • Improves easy access for cleaning and maintenance.
  • Commonly used in shower areas and WC drain areas.
Nominal Size (inch) Nominal Size (mm) ID SL WT H L
2½ x 2½ 75 x 75 75.3 40 3.2 168 250
3 x 3 90 x 90 90.5 52 3.2 180 289
3 x 3 90 x 90 90.5 52 3.2 160 289
4 x 4 110 x 110 110.4 48 3.2 192 312
4 x 4 110 x 110 110.4 48 3.2 219 360
4 x 4½ 110 x 125 110.4 48 3.2 218 366

 

Additional information

Size

2 1/2 inch x 2 1/2 inch, 3 inch x 3 inch (With Leg), 3 inch x 3 inch (Without Leg), 4 inch x 4 inch (Short), 4 inch x 4 inch (Long), 4 inch x 4 inch (Deeper-50mm Water Seal), 4 1/2 inch x 4 (Long), 4 1/2 inch x 4 inch (Deeper-50mm Water Seal)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Quick Comparison

SettingsAshirvad PVC P Trap-Solfit removeAshirvad CPVC Brass Tee MABT removeAshirvad CPVC Brass Elbow – Long removeAshirvad CPVC Step-Over Bend removeAshirvad CPVC Brass Elbow – MABT removeAshirvad CPVC Tee Holder remove
Image
SKU
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
PriceFrom 199.00 144.00 223.00From 66.00 226.00From 18.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Select options

Add to cart

Add to cart

Select options

Add to cart

Select options

Description
This is a common SWR fitting used in combination with Pushfit & Solfit Pipes. It prevents transmission of unfavourable odours from the washroom to the living area. Ashirvad offers many variations of P-traps to suit the unique needs of your toilet.
The Brass tee MABT is an advanced CPVC fitting that is used to direct and divert water flow in the plumbing system. This fitting features a plastic tee with a brass threaded male end on one water inlet channel that can be secured on a threaded female end of an adjoining fitting. The brass tee MABT can be fitted along various diameters across different pressure outlets in the plumbing system. A tee is specifically useful in changing the direction of water flow with minimum to negligible structural changes in the overall piping system.This CPVC fitting is an extended variation of the elbow which is used to divert the flow of hot and cold water at a 90-degree angle in the plumbing system. The longer brass extension of this fitting is useful for the installation of bathroom fittings through thicker-than-average wall blocks of concrete. The threaded brass end can be used to connect to health faucets and taps while the socket-end connects to the adjoining pipe.The step-over bend is one of few pipe fittings that provides an innovative solution for making arrears in existing vertical pipes. The unique fitting can be attached to in-built sockets of existing pipes without dislocating the water-flow in a running pipe.The Brass Elbow – MABT is a variation of the typical elbow joint with a protruding brass threaded exterior. This part is screwed into a female ended part of fitting or equipment to divert the flow of water in a certain direction at a 90-degree angle in the plumbing system.This handy CPVC fittings is used to hold exposed long vertical pipes that run across multiple floors in a variety of residential, commercial and multi-purpose buildings. The tee holder needs to be screwed in securely on a wall panel to hold the exposed tee in place.
Content
  • This is a self-cleaning trap. Prevents choke-ups as well as blockages in the drainage system.
  • Maintains the minimum required water seal. A water seal prevents the spread of sewer gases in the living area and aids in the optimal movement of water.
  • Improves easy access for cleaning and maintenance.
  • Commonly used in shower areas and WC drain areas.
The Brass tee MABT is an advanced CPVC fitting that is used to direct and divert water flow in the plumbing system. This fitting features a plastic tee with a brass threaded male end on one water inlet channel that can be secured on a threaded female end of an adjoining fitting. The brass tee MABT can be fitted along various diameters across different pressure outlets in the plumbing system. A tee is specifically useful in changing the direction of water flow with minimum to negligible structural changes in the overall piping system.This CPVC fitting is an extended variation of the elbow which is used to divert the flow of hot and cold water at a 90-degree angle in the plumbing system. The longer brass extension of this fitting is useful for the installation of bathroom fittings through thicker-than-average wall blocks of concrete. The threaded brass end can be used to connect to health faucets and taps while the socket-end connects to the adjoining pipe.The step-over bend is one of few pipe fittings that provides an innovative solution for making arrears in existing vertical pipes. The unique fitting can be attached to in-built sockets of existing pipes without dislocating the water-flow in a running pipe.The Brass Elbow – MABT is a variation of the typical elbow joint with a protruding brass threaded exterior. This part is screwed into a female ended part of fitting or equipment to divert the flow of water in a certain direction at a 90-degree angle in the plumbing system.This handy CPVC fittings is used to hold exposed long vertical pipes that run across multiple floors in a variety of residential, commercial and multi-purpose buildings. The tee holder needs to be screwed in securely on a wall panel to hold the exposed tee in place.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Size

2 1/2 inch x 2 1/2 inch, 3 inch x 3 inch (With Leg), 3 inch x 3 inch (Without Leg), 4 inch x 4 inch (Short), 4 inch x 4 inch (Long), 4 inch x 4 inch (Deeper-50mm Water Seal), 4 1/2 inch x 4 (Long), 4 1/2 inch x 4 inch (Deeper-50mm Water Seal)

Size

3/4 inch x 3/4 inch x 1/2 inch

Size

3/4 inch x 1/2 inch

Size

1/2 inch, 3/4 inch, 1 inch, 1 1/4 inch, 1 1/2 inch, 2 inch

Size

3/4 x 1/2 inch

Size

1/2 inch x 1/2 inch x 1/2 inch, 3/4 inch x 3/4 inch x 1/2 inch

Shopping Cart
No products in the cart.
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping