Ashirvad PVC Nahani Trap Single Piece Without Jali-Solfit

In Stock
158.00 101.00

This is a specialized type of Nahani Trap SWR fitting provided in the floor of the washroom to collect waste water from shower, balcony and bathroom areas.

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
Switches/Plumbing Material/Lights/MCBs
Switches/Plumbing Material/Lights/MCBs Shipping

Description

  • This is a single piece injection molded fitting without joints. This specialized design provides better impact strength and helps maintain improved water seal level.
  • Installation and maintenance is seamless because of the stopper provided at the spigot end for proper pipe length insertion
  • Commonly used in shower areas and WC drain areas.

 

Nominal Size (inch) Nominal Size (mm) ID WS WT OD H
2 x 2 (3" ht) 63 x 63 85.60 9 2.4 50 63
3 x 3 (3" ht) 90 x 90 90.40 9 2.2 63.27 100
4 x 2 (3" ht) 110 x 63 110.38 9 - 90.20 85.5
4 x 3 (3" ht) 110 x 90 110.38 9 3.2 - 85.5
4 x 4 (3" ht) 110 x 110 110.38 9 - 90.20 85.5
4 x 2½ (5" ht) 110 x 75 110.40 9 3.2 - 124.5
4 x 3 (5" ht) 110 x 90 110.40 9 3.2 75.18 124.5
4 x 4 (5" ht) 110 x 110 110.40 9 - 90.20 124.5

 

Additional information

Size

4 inch x 2 1/2 inch

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Quick Comparison

SettingsAshirvad PVC Nahani Trap Single Piece Without Jali-Solfit removeAshirvad CPVC Class-1 / SDR 11 Pipe removeAshirvad CPVC Brass Elbow – Long removeAshirvad CPVC Brass Tee MABT removeAshirvad CPVC 3 In 1 Mixer All Top (7”) removeAshirvad CPVC Elbow 90° remove
Image
SKU
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price 101.00From 351.00 223.00 144.00From 392.00From 17.00
Stock
In Stock
Out of stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockOut of stockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Select options

Add to cart

Add to cart

Select options

Select options

DescriptionThis is a specialized type of Nahani Trap SWR fitting provided in the floor of the washroom to collect waste water from shower, balcony and bathroom areas.
  • Length- 3 meters
  • High Dimensional accuracy to ensure a defect-free system.
  • High Heat Resistance (Short term application – 93⁰ C & for Continuous use – 82⁰ C)
  • Low toxicity
  • Very High Limiting Oxygen Index (LOI) of 60%, does not catch fire or sustain burning
This CPVC fitting is an extended variation of the elbow which is used to divert the flow of hot and cold water at a 90-degree angle in the plumbing system. The longer brass extension of this fitting is useful for the installation of bathroom fittings through thicker-than-average wall blocks of concrete. The threaded brass end can be used to connect to health faucets and taps while the socket-end connects to the adjoining pipe.The Brass tee MABT is an advanced CPVC fitting that is used to direct and divert water flow in the plumbing system. This fitting features a plastic tee with a brass threaded male end on one water inlet channel that can be secured on a threaded female end of an adjoining fitting. The brass tee MABT can be fitted along various diameters across different pressure outlets in the plumbing system. A tee is specifically useful in changing the direction of water flow with minimum to negligible structural changes in the overall piping system.The 3 in 1 mixer is used for the installation for a combination structure of hot & cold taps and showers in residential building projects. This mixer accommodates vertical pipes running through the plumbing systems from the top of the fitting range.This elbow fitting features a brass interior threaded section to direct the flow of water at a 90 degree angle between adjoining pipes
Content
  • This is a single piece injection molded fitting without joints. This specialized design provides better impact strength and helps maintain improved water seal level.
  • Installation and maintenance is seamless because of the stopper provided at the spigot end for proper pipe length insertion
  • Commonly used in shower areas and WC drain areas.

Advantages

Largest Indian company in the piping and plumbing services
Continuous support network across the plumbing industry
High Chemical Resilience
High-Pressure bearing capacity
Lower Thermal Expansion. Leads to less looping and offsets
CFTRI Central Food Technological Research Institute India

Certification

NSF / ANSI 61 IAPMO - India
BIS Bureau of India Standards
CFTRI Central Food Technological Research Institute India

Other specifications

Applications Suitable for hot and cold water systems in residential and commercial buildings including but not limited to private homes, apartments, offices, showrooms, schools, hotels and hospitals
Type of Piping Class 1/ SDR 11 pipe
Colour Tan Red Stripe with Logo
Standard IS 15778 : 2007 ASTM D 2846 : 2011
This CPVC fitting is an extended variation of the elbow which is used to divert the flow of hot and cold water at a 90-degree angle in the plumbing system. The longer brass extension of this fitting is useful for the installation of bathroom fittings through thicker-than-average wall blocks of concrete. The threaded brass end can be used to connect to health faucets and taps while the socket-end connects to the adjoining pipe.The Brass tee MABT is an advanced CPVC fitting that is used to direct and divert water flow in the plumbing system. This fitting features a plastic tee with a brass threaded male end on one water inlet channel that can be secured on a threaded female end of an adjoining fitting. The brass tee MABT can be fitted along various diameters across different pressure outlets in the plumbing system. A tee is specifically useful in changing the direction of water flow with minimum to negligible structural changes in the overall piping system.The 3 in 1 mixer is used for the installation for a combination structure of hot & cold taps and showers in residential building projects. This mixer accommodates vertical pipes running through the plumbing systems from the top of the fitting range.This elbow fitting features a brass interior threaded section to direct the flow of water at a 90 degree angle between adjoining pipes        
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Size

4 inch x 2 1/2 inch

Size

1/2 inch, 3/4 inch, 1 inch, 1 1/4 inch, 1 1/2 inch, 2 inch

Size

3/4 inch x 1/2 inch

Size

3/4 inch x 3/4 inch x 1/2 inch

Size

3/4 x 1/2 inch, 1 x 1/2 inch

Size

1/2 inch, 3/4 inch, 1 inch, 1 1/4 inch, 1 1/2 inch, 2 inch

Shopping Cart
No products in the cart.
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare